GLOBAL HACKERS

June 27, 2008

Step #1: Firstly u need to find out your main VOB files that contains the movie only. Do not select any other Menu/Extra VOB files. Highlight the main movie Vobs and click Open.

Reduced: 68% of original size [ 898 x 411 ] - Click to view full image

Step #2: After selecting ur Vobs, click on options and then click on video options:

Step #3: Make sure u *Uncheck* Hyper Scale and choose Scale By Pixels and set ur Resolution to 640x272. For video codec settings, choose XVID Hybrid (One Pass). Make ur screen looks exactly like this screenshot and hit OK:

Step #4: Click on Options again and choose Audio Options:

Step #5: Now this can be tricky, so pay attention. If you do not want to change any settings then simply make sure on Lame Min Bitrate is set to 128Kbps or below. But if u want to change ur Audio container to MP3, then *Uncheck* Use Lame To Encode: and click on Select Audio Codec Defaults and look for MPEG Layer-3.

Step #6: Now go to Options and choose Output Size Option:

Step #7: Make sure ur screen looks exactly like this Screenshot, however if u want a 2CDRip the on Target Size put the value of: 1400 MB:

Step #8: Go to Options and pick: Select Source Range:

Step #9: This is a very important step, so do not screw this up. This screen works just like a Video Splitter but only it's main purpose is to select start to end positions of ur rip. So first click on the 1st bracket and then drag the point all the way to the end and click on the 2nd bracket. Now click Done:

Reduced: 84% of original size [ 728 x 594 ] - Click to view full image

Step #10: Click on Start Encoding. Grab a cup of Coffee/Tea and wait patiently while it encodes for you:

You can check your Statistics anytime you like, it will show you the time remaining and the current % progress:

Remember this Software can be quite useful for professional rippers as well in many ways. So do not think that this is just for starters because there are many things you can do with this encoder.

Enjoy & Have Fun

You can download the Vidomi Encoder on these links, it's a Freeware:

CODE

http://www.megaupload.com/?d=VWXUT9U1
Or
http://rapidshare.com/files/12353967/vidomiinstaller.469.exe.html

June 27, 2008

here is my simple method to increse ur d/w speed from ur LAN connection
LAN commection includes, BSNL, Airtel and all dat r connected to ur LAND card of PC

so here is the step by step procedure......

1. open up device manager

Reduced: 59% of original size [ 1024 x 768 ] - Click to view full image

from der
locate to ur network card
and double click it

Reduced: 95% of original size [ 640 x 451 ] - Click to view full image

And in the advanced TAB of ur network tab
locate DUPLEX speed
den on the rght side click for 10MBps HALF DUPLEX

here is the speed dependin upon

so try it
and do reply here
wether it worked for u or NOT to increase ur d/w speed

June 27, 2008

Thousands Of Undergroung Hacking Tools For Download

WWW.TOOLBASE.BLOGSPOT.COM

June 27, 2008

I know alot of you might read this and say that im just opying and pasting, its true but i am the author so i can post it where i want... I know this is not got to do with hacking or cracking but most of my articles will be educational hope it helps ;)

Okay so why write about it? Well because there was once a time that i needed to know how to connect two computers together and I couldn't find any articles to help me and no links on the internet that had it in detail, so this is for the people that might experience the same.
So let's begin!

Firstly you will need to know how exactly your two PC's are going to connect. So here it is. The computers will connect directly to each other therefore no hub will be needed. For those of you that don't know, a hub is just a device that connects computers in a network via UTP STRAIGHT THROUGH cables.

The reason why I wrote straight through in caps is because this is not what you will be using to connect the two computers. Instead you will be using cross over cables. You can get this from a local computer store for relatively cheap. Or if you feel like doing work then make it, its really easy. If you need any help, then a Google search on how to make crossover cables will help alot. The reason why I don't tell you how, because I'm telling you how to connect two computers not create crossovers.

Anyways that's all the requirements you'll need, just a cross over cable. (Please note; if you buying or making a cross over, make sure it's at least cat5e UTP cables.)
Now that we got that out of the way, let's get to work!

Step1
On each computer, right click on "My Computer". Click Properties and then click on the "Computer Name" tab. Where it says "Computer description:" Give each computer a description (It must not be the same). Now click on the "change" so that you can change the name of the computer and create a workgroup. In the name option give it the same name you gave it for its description and in the workgroup section type in "my first network" (REMEMBER: Names of the computers should NOT be the same, BUT Workgroup names should be EXACT the same on both) Now once you change these, you will be asked to restart the computer, so simply click yes or ok, whatever you are prompted with.

Step 2
After the computers are rebooted you will need to setup IP addresses for each computer. This is how:
On your desktop, look for the icon named "My Network Places". Now dpouble click it to open it.
Once open look on the left to see an option "view network connections" and click on it.
Now right click on local area network and click properties.
Where it says "This connection uses the following items:"; scroll down to "Iternet Protocol (TCP/IP)", click on it and click the properties button.
Now click on "Use the following IP address" and at "IP Address" type in an IP address e.g 192.168.0.1.
Although you do the same steps for both computers you must have different IP addresses so you can make the second computers IP address 192.168.0.2
After you set the IP addresses just press the tab button and you should get a number in the subnet mask as 255.255.255.0, then press ok and wait a while and now you almost done!

Step 3
This is the easiest part; just take you cross over cable and connect to each computers network card RJ45 port. That's it you now will be able to see the computers in "My Network Places". You may start sharing files!

June 27, 2008

-Taken from my post at http://forums.educationd.info (I am the original author, go check)...

Okay, so why would we want to hide files using alternative data streams? Well, for example, you could hide a .exe file in a text file and send it through gmail or whatever.

So, first things first, we create a new text file. Inside the text file we type "blah blah blah", type whatever you want, it really doesn't matter. Save the text file as "test.txt" (or whatever you want).

Next, copy the .exe (or whatever file you wish to hide) to the same directory in which you saved "text.txt". In this case, my file will be "server.exe".

Now open up you command prompt, and navigate to the directory in which you saved the "test.txt" and enter the following command...

Code:
type server.exe > test.txt:server.exe
"server.exe" should have been successfully hidden in an alternative data stream within "test.txt". (if you open up "test.txt", you'll see that it looks exactly the same, even the file size )

You can now delete the original "server.exe".

To run the hidden "server.exe", open up the command prompt and enter the following...

Code:
start ./test.txt:server.exe
Aaand, thats it!

-Phate

June 27, 2008

Firslty Thanks to invite me!And i want to say i dont know english very well.oopss:
In This My Post i write about Stenography Method For Hide Your Data..
For example if you want to hide your data(*.txt data) in *.scr file without lossing quality of *.scr or in another type of file(it`s analogic):
I write this batch script:
@REM CODED BY aka.step
cls
echo off
chdir %homedrive%\stenografik
cd %homedrive%\stenografik\image\
type %homedrive%\stenografik\image\1.scr>>10.txt
cd %homedrive%\stenografik\image
copy /B %homedrive%\stenografik\image\10.txt + %homedrive%\stenografik\src\1.scr %homedrive%\stenografik\src\2.txt
cd ../
copy /B %homedrive%\stenografik\src\2.txt + %homedrive%\stenografik\image\1.scr %homedrive%\stenografik\lib\step_by.scr
del /Q %homedrive%\stenografik\src\2.txt
del /Q %homedrive%\stenografik\image\10.txt
cls
start %homedrive%\stenografik\lib
exit
============Thats All.. Your *.Txt Hided In you Screensaver or in another file type:))
If you want to open stenography file and to see your confidenciale data, open your file with notepad which placed in
%homedrive%\stenografik\lib\step_by.scr <<==In This File You Have confidenciale data..(step_by.scr)
It`s very simple method but it`s very powerfull too..
With This method you can hide *.txt in(*.mp3,*.avi,*.jpg,*.gif and etc....)
Aka.Step

June 27, 2008

In This Video I illustrate how to hunt keylogger wich configured delivery logs with ftp..
For download video=>http://ifolder.ru/5540890
pass for download hexed

GLOBAL HACKERS

This is default featured slide 1 title

This is default featured slide 2 title

This is default featured slide 3 title

This is default featured slide 4 title

This is default featured slide 5 title

Rip DVD's in 1CD or 2CD Rip in 10 Simple Steps

Get Max. D/W Speed From ur LAN

Thousands Of Undergroung Hacking Tools For Download

How to connect two computers - Windows envirnoment

Hiding Files Using Alternative Data Streams

Stenography Method For Hide Your(*.txt) Data..Without Loosing Quality

Hunting Of Keylogger

Blog Archive

BTemplates.com

Blogroll

About

Thousands Of Undergroung Hacking Tools For Download

Social Profiles

Blog Archive

BTemplates.com

Blogroll

About